Nitronic60 Stainless Steel Wire Threaded Inserts

Stainless Steel Wire threaded inserts
A wire threaded inserts made from nitronic60 eliminates wear and fretting when used with stainless steel screws.  Due to the addition of silicon and manganese to the Nitronic60 alloy, which reduces wear and abrasion, surface friction between all mating screws and nitronic60 bushings is superior to 304 stainless steel bushings, thus completely eliminating or reducing particulate matter.  Nitronic60 bushings do not require additional coatings or coatings, making them ideal for use in a vacuum because there is no vent air, and they are not limited by the low temperature properties of certain coatings, such as cadmium and dry film roller skiders.  The Nitronic60 materials were non-magnetic and had good corrosion resistance (panel 1.0G/0) with a tensile strength of approximately 2000000s and hardness of RC43-50 and were available for temperatures up to 5000F, with typical applications including semiconductors and aerospace.  
Raw material characteristics  
nitronic60  
Excellent wear resistance  
Corrosion resistance: medium  
Minimum tensile strength at room temperature: 900Mpa  
Hardness: RHc43-50  
Scope of use and examples: Use with high-grade stainless steel screws;  No additional coating or plating required;  Use in vacuum environment.

Product performance and application
wire thread inserts performance, wire thread inserts is a new type of connection fastening technology, in the screw connection can effectively improve the connection conditions, greatly improve the reliability of screw connection, its advantages are as follows:
1.Steel wire thread inserts is used in all kinds of low strength materials, which can greatly improve the wear resistance of screw connection and avoid the damage of connection thread.  
2. Because the steel wire thread inserts has a certain elasticity, can make the load distribution on the thread ring is more uniform, eliminate the pitch and tooth type deviation between screw and screw hole, and can absorb vibration, thus improving the thread connection strength and fatigue resistance. 
3. The locking steel wire thread inserts can lock the screw in the screw hole, so that the screw will not release when experiencing shock vibration, which is better than the usual locking device.  
4. Compared with the method of inlaying steel or copper bushing, under the same strength condition, smaller size and higher strength screws can be selected, so that the volume can be reduced and the weight can be reduced.  5. The hardness of the steel wire thread inserts is higher than that of the screw, so it has less wear and tear in the process of connecting with the screw and can be used repeatedly.  The tensile strength of the wire thread inserts is more than 7 times that of the screw, so the wire thread inserts will not be damaged when the screw is broken.